본 제품은 2023년 6월부터 출고분 부터 높은 퀄리티의 작업성을 위해 일반납의 20배 가격의 고순도 무수은 은납을 체결한 제품입니다. 고순도은납은 용융점이 높아 E Series Q-G Receptacles are available with quick release inserts. Quick insert release is accomplished by turning screw lock from front of insert. Insert can then be removed from the rear. For PC board applications, insert can be removed/assembled to the housing while soldered to the PC board. E Series receptacles can be specified as complete assemblies, or as separate inserts and housings. Stocking separate inserts and housings offer considerable cost and time savings by minimizing inventory and maximizing configuration possibilities. FEATURES * Replaces Neutrik D Series * 3-pin contact; male and female types * Both male and female fit in same panel cutout * Choice of 3 terminations; conical spring solder terminals, straight or right-angle PC terminals * Inserts and housings can be specified separately * Quick release inserts for ease of removal * Locking receptacles * Protected ground clip minimizes scooping damage * Insert lock detent resists disassembly from shock or vibration during normal handling andtransportation * Silver and gold-plated contacts available * Rugged metal shells; black or satin nickel finishes * Through-the-shell ground connection and all-metal shells for greater shielding effectiveness * Compatible with Switchcraft Q-G, QGP and other connectors with similar configurations QUICK RELEASE INSERT In two simple steps, inserts can be released while housing stays fastened to the panel. 1. With a small screwdriver, twist insert locking screw from front of insert. 2. Remove insert from the rear of the housing. |
SPECIFICATIONS ELECTRICAL Contact Resistance: 50 milliohms maximum, per pole. Current Rating: 15A Insulation Resistance: 2 X 10 M(omega) Dielectric Resistance: 1,000 V rms Capacitance: 10 pF MECHANICAL Insertion/Withdrawal Forces: 7 pounds maximum-5 pounds nominal insertion, 7 pounds maximum-5 pounds nominal withdrawal. Life: 10,000 operations (minimum). ENVIRONMENTAL MATERIAL Shells: Die-cast; satin-nickel or Black Velvet. Inserts: Glass-filled thermoplastic. Socket Contacts: Copper alloy, silver- or gold-plated. Pin Contacts: Copper alloy, silver- or gold-plated. Latch Release: Steel, nickel-plated. Insert Locking Cam: Die-cast zinc. TERMINALS Four terminations are available on E Series receptacles: 1. Conical Spring Solder terminals - conical spring on each pin holds wire in place providing constant pressure during soldering process. This effectively acts as a third hand, assuring a high quality solder termination. Housing mounts to panel. 2. Straight PC terminals - direct termination to PC board. Housing mounts to panel. 3. Right-angle PC terminals - direct termination to PC board at a right-angle. Housing mounts to panel. 3. SC - Solder cup |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?