The all-new KLARK TEKNIK DN370 is the latest evolutionary step in a process of design refinement that goes back over 30 years. With DN370 we’ve started from the ground up and produced a unit that is totally without compromise, and one that we believe is the finest professional graphic equaliser in the world today. It also perfectly complements the existing KLARK TEKNIK range of equalisers, both analogue and digital.
Our aim is simply to provide discerning professional users with the best possible solutions for system control. Our market research shows that the graphic equaliser is still the most commonly-used EQ device in fixed and mobile live sound applications, as well as many installations, mainly because the physical user interface provides instant access and controllability in even the most demanding environments. To this end we have completely re-evaluated the role of the graphic EQ, focusing exclusively on providing a new feature set that better reflects the needs of modern users.
Like all KLARK TEKNIK units, DN370 is engineered for a lifetime of hard use and carries our 3-year international factory warranty.
The equaliser shall provide ±12dB of boost and cut at 30 1/3 octave ISO centre frequencies from 25Hz-20kHz, selectable to ±6dB for increased fader resolution.
The equaliser shall meet or exceed the following performance specifications:
Frequency
Response ± 0.5dB
(20Hz-20kHz)
Distortion (THD+N) <0.003% @1kHz,
+4dBu
Dynamic Range >114 dB (20Hz-20kHz unweighted, ±12
dB range)
The equaliser shall allow have one adjustable second-order low pass filter and one adjustable second-order high pass filter per channel, and two adjustable overlapping notch filters per channel.
The unit shall have an equalisation section by-pass and shall be fail-safe, that is the unit shall return automatically to the by-pass condition in the event of power supply interruption.
Each equaliser shall use centre-detented slide potentiometers arranged to give a graphical display of frequency plotted against level. The slide potentiometers shall have protective covers to inhibit the ingress of dirt and dust.
All audio connections shall be electronically balanced and use XLR and Phoenix style connectors. Input and output transformers shall be available as an option.
The unit shall be capable of operating from a 100-240V ± 10% 50/60Hz a.c. power source.
The equaliser shall be the KLARK TEKNIK Dual Channel model DN370, and no alternative specification option is available.
Inputs
Two
Type Electronically balanced (pin 2 hot)
Impedance (Ω)
20k
Maximum input level +22dBu
Outputs Two
Type
Electronically balanced (pin 2 hot)
Minimum load impedance 600 Ω
Source
impedance <60 Ω
Maximum output level +22dBu into
>2kΩ
Performance
Frequency response relative to
signal at 1kHz ±0.5 dBu 20Hz-20kHz
EQ out ±0.5 dBu
EQ in (flat) ±0.5
dBu
Distortion (THD+N) < 0.003% @ 1kHz +4 dBu
Dynamic range >114dB
(20Hz-20kHz unweighted, ±12dB range)
Overload indicator +20 dBu
Gain - ∞
to +6dBu
Equalisation 30 Bands
Centre Frequencies To BS EN ISO 266:1997
25Hz-20kHz, 1/3 octave tolerance ±5%
Maximum Boost/Cut ±12dB, ±6dB
High
Pass Filter Slope 12 dB/octave
Low Pass Filter Slope 12 dB/octave
Notch
filter attenuation >17dB
Q=32
Terminations
Audio 3-pin XLR and 6-pin
Phoenix
Power 3-pin IEC
Power Requirements
Voltage
100V-240V a.c.
Consumption
<60W
Dimensions
Height 133mm (5.25 inch) (3U
High)
Width 482mm (19 inch)
Depth 205mm (8
inch)
Weight
Nett 5.8kg
Shipping
7.0kg
Options
Input and output balancing
transformers
Trade
Descriptions Act: Due to
the company policy of continuing improvement, we secure the right to alter these
specifications without prior notice.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?