The ART Pro MPA II is the next generation in affordable high-performance
microphone preamp technology. Each microphone input circuit, with selectable
+48V phantom power, features variable input impedance which can radically vary
the overall performance of any high quality dynamic or ribbon microphone. The
Pro MPA II can be configured for dual mono or stereo operation with selectable
mid/side mic support, summing the adjacent channel, to decode left/right
signals.
- Frequency Response 15Hz to 48 kHz (+0, -1dB) @ normal plate
voltage 15Hz to 120 kHz (+0, -1dB) @ high plate voltage
- Dynamic
range: >110dB ("A" weighted)
- CMRR: >90dB
- THD:
<0.005% (typical)
- Equivalent Input Noise: -129dBu (XLR, "A"
weighted)
- Maximum Input Level: +19dBu (cannon)
- Maximum
Instrument Input: +17dBu
- Input Impedance: 150-3000 Ohms adjustable
(XLR) >800K Ohms (Instrument)
- Maximum Output Level: +27dBu
(XLR)
- Output Impedance:: < 47 Ohms (XLR)
- Maximum Gain:
75dB
- Meter Calibration: 0 VU = +4dBu output (+4dB mode) 0 VU = -10dBV
output (-10dB mode)
- High Pass Filter: single pole, 10-200 Hz
adjustable
- Power Requirements: USA - 105 to 125 VAC / 60 Hz Export
units configured for country of destination
- Dimensions (HxWxD): 3.50
x 19.0 x 8.75 in.
- Dimensions (HxWxD): 88 x 482x 222 mm
-
Weight: (lb/kg) 10.5 / 4.7
- 2-channel tube-based microphone preamplifier
- Variable
input impedance for flexible microphone voicing (150 Ohms to 2,400
Ohms)
- Selectable plate voltage for tweaking your tone
-
Selectable +48V phantom power
- Large VU meters display input and
output levels
- Backlit function switches shine brightly so you know
when they're in use
- Low noise at lower gain settings
-
Extremely low total harmonic distortion (THD)
- Wide frequency
response
- Additional front-mounted instrument input jack
-
Operates at +4 dBm/-10 dBv output
- Selectable stereo/dual operation of
output controls
- Automatic instrument input selection
The Pro MPA II can operate at either a low or high plate voltage on the
two integrated hand-selected 12AX7 tubes for wider variation of preamp tone and
performance. Large back-lit analog VU output meters display input or output
levels while multi-colored LED arrays, with average or peak hold, show tube
gain.
Housed in a standard 2u space rack-mountable steel chassis, with
CNC routed black anodized aluminum face panel, the Pro MPA II is designed to
deliver years of reliable operation in the studio, production facility, or on
the road for live sound reinforcement.
A professional microphone preamplifier is defined by warmth, presence and
clarity - core elements that make an audio processor desirable. They've designed
a microphone preamplifier that captures all these elements, with an
exceptionally affordable price. Introducing the Digital MPA by ART. With
features like variable input impedance, selectable plate voltage, dual
differential Class A inputs, digital outputs and sample rates up to 192kHz, it
is truly a modern day classic.
Whether you're working with a computer, hard disk or digital multitrack recorder, the Tube MP's TEC award nominated design will allow you to obtain professional results at an affordable price. ART preamps offer warm tone, useful features, and are innovatively designed. ART's line of Tube MP products add presence, clarity and fullness to any signal, and is exceptionally low-noise. Their Tube MP Studio V3 features V3 Technology (Variable Valve Voicing), which provides optimized reference points to begin the recording process. V3 delivers a wide variety of settings designed for various microphones and DI inputs, including guitars, basses, keyboards, synths, electronic drums and much more. Don't settle for a copy-cat lookalike. Go with the real thing -- the Tube MP by ART.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?