MP13 MINI-MIC PREAMP / MICROPHONE
PREAMP
- XLR and 1/8” Inputs
- XLR and 1/4” Outputs
- Gain
Control
- Clip LED indicator
- +21 Volt Phantom Power
The MP13 is designed to provide simple, inexpensive microphone preamplification for a variety of applications. The unit has both XLR and 1/4” inputs and outputs, a single Gain control with a Clip LED indicator, and Phantom powering is included for use with a condenser microphone. The 1/4” output is specially designed for use as either a mono unbalanced output, or a stereo headphone output.
FEATURES
- XLR and 1/8” Mic Inputs
- XLR and 1/4” Outputs
- Gain Control
-
Clip LED indicator
- 1/4” Output Drives Stereo Headphones
- +21 Volt
Phantom Power - available for 1/8” microphones
DESCRIPTION
INPUT: 1/8” (3.5mm) and female XLR jack for signal input.
OUTPUT: 1/4” and
male XLR jack for signal output. May be connected to stereo headphones for
personal monitoring.
POWER: Sleeve positive barrel jack for connection to the
AC power adapter.
GAIN: Controls the amount of signal increase to the
MP13.
CLIP: LED for indicating circuit clipping. Indicates distortion is
possible.
PHANTOM POWER: When pressed in, applies +36 volts of phantom
powering to the XLR input.
PWR: LED for indicating power is applied to the
MP13.
SPECIFICATIONS
Connectors:
Inputs; XLR, 1/8” (3.5mm) TRS balanced Mic In
Outputs: XLR balanced, 1/4” unbal. Aux/Hdphn
Input Impedance: 10K Ohms bal,
unbal.
Max Input Level: +4 dBV XLR bal, +10 dBV unbal.
Max Gain: 60
dB/XLR, 54 dB 1/4”
Phase Shift: <10 deg. 20 Hz - 20 kHz
EIN: -108 dB
max.
THD: <.01%
IMD (SMPTE) <.01%
CMRR: > 80dB
Phantom
Power: +21 Volts, 6 mA
Power: 12 VDC adapter
Weight: 1 lbs
(.45Kg)
Size: 3.4” x 4.2” x1.4”
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?