Perception 420 is a multi-pattern large-diaphragm condenser microphone for
more demanding professional studio recording applications. Offering high
sensitivity and 155 dB maximum SPL, the Perception 420 delivers a warm
transparent sound quality ideally suited for ensemble recording, grand piano,
woodwind and brass instruments as well as drums and percussion instruments.
In addition, three selectable polar patterns – cardioid, omnidirectional
or figure-eight – allow a wide range of stereo miking techniques and ambient
recording. A switchable bass cut filter and preattenuation pad enable the
Perception 420 to be used close to sound sources in sound fields as high as 155
dB.
The microphone's chassis is made of precision-tooled zinc/aluminium
alloy and boasts a dent resistant stainless-steel wire-mesh front grille. It
comes complete with a spider-type shock mount in an aluminium carrying case.
Type: Dual-capsule,1-inch large-diaphragm, true condenser
pressure-gradient microphone
Polar pattern: Cardioid,
omnidirectional, figure-eight
Frequency range: 20 to 20,000
Hz
Sensitivity: 28 mV/Pa (-31 dBV)
Max.
SPL: 135/155 dB SPL (0/-20 dB) for 0.5% THD
Equivalent
noise level: 16 dB-A (IEC 60268-4)
Signal/noise ratio
(A-weighted): 78 dB
Preattenuation pad: 0 dB, -20
dB
Bass filter: 12 dB/octave, 300 Hz
Impedance: <=200 ohms
Recommended load
impedance: >=1000 ohms
Current consumption:
<=2 mA
Power requirement: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Finish: metallic
blue/nickel grille
Dimensions: 53 dia. X 165 mm/2 x 6.5 in.
Net weight: 525 g (18.5 oz.)
Shipping
weight: 1,970 g (4.3 lb.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?